Technovalue Solutions Private Limited

The Emtek P100 Microbial Air Sampler offers two CPU controlled sampling rates, 28.3 LPM (1 CFM), and 100 LPM, to allow for continuous monitoring of critical processes, or to take quick cubic meter “grab samples”. The sampled air volume is HEPA filtered prior to being exhausted at the unit, or remotely through optional attachments. The unit may be operated directly via its user-friendly LCD/Touch Screen interface, or through your Network (LAN) via PC based software, which allows for full operable control of all units connected to your Network. An Infrared remote is included, which allows for Start/Stop/Pause/Resume functionality of 1-5 units.

 

Applications

Microbiological test – Pharmaceutical and biotechnological industries

Fully automated integrity test instrument, which performs bubble point, diffusion flow, enhanced bubble point, and water-based test for hydrophobic filters, economic and good performance.Main features

• Display of test data and curves in real time, monitoring the whole process of testing.
• Provides automatic printing set function, the user can operate more simple and convenient.
• Water Based test (WH) for Hydrophobic Filter: using purified water as test liquid instead of IPA and Ethanol, thus it can avoid trace quantity of ethanol or IPA contamination when testing filters.
• The instrument can store 500 history record and curve.

Applied range

• Disc Membrane:Φ25mm-Φ300mm;
• Standard Cartridge:2.5″- 40″
• Capsule & Mini Catridge
• Air filter test :2.5″- 40

Product introduction
The on-line glove integrity tester WGT-1000 produced by our company is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves. Our company has been engaged in the production and sales of filter integrity testers for many years, and the pressure control technology is very mature.
The device uses a wireless communication mode, built-in air pump and lithium battery, through systematic management, so that multiple detection units can be linked in real time. In addition to complying with the requirements of FDA and GMP and other laws and regulations, four-level authority management and electronic signature design are also set up to comply with 21CFR part 11 electronic records and electronic signature certification requirements; The history record can store more than 12000 groups, and at the same time, it has its own storage FLASH, which can transmit and save the test records in time; the structure design is simple and exquisite, no additional equipment is required, no need to remove gloves, and the glove tray can be replaced, supporting different specifications and sizes of gloves Detection. The high-precision pressure sensor is adopted, and the glove test is fast and accurate.

Product introduction The on-line gloves Integrity Tester GT-3.0 are leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

Product Features

• The instrument adopts a small amount of frequent air inlet mode, with uniform inlet velocity in gloves, to avoid gloves deformation.
• The authority management and electronic signature design is in line with the 21 CFR part 11 for certification requirements of electronic records and electronic Signature.
• Historical records can be used for print, storage, and query.
• It is equipped with a color touch screen and humanized interface design, according to different test parameters, for automatic selection and matching, which can be most adaptive to the current gloves test procedure, date, and time display.
• It is convenient to move, easy to carry, and quick to connect.

Application Area

• Pharmaceutical industry
• Medical device industry
• Food and beverage industry
• Environmental protection industry

Technical Parameter

 

• Working power supply: AC 220V 50Hz, 120W with battery
• Rated power: 2-8min
• Pressure range: 500-5000Pa
• Response value: ≤50Pa
• Noise: ≤50dB(A)
• Working mode: Continuous work
• External gas source: Compressed air, nitrogen, inert gas
• Sealing pressure: ≤0.8Mpa
• Other function: Audit trail, data export by USB (customization)
• Historical record: 10000 groups
• Print Function: Built-in Printer
• Dimensions: 400260270*250mm
• Weight: 10KG
• On-line gloves tray: Can supply one free, if need more customization
• Battery: Li-ion battery
• Pump: Oil, water-free, can customize-built in pump

Product introduction
The freezing point osmometer FPOSM-V2.0 produced by our company with independent research and development is in accordance with Raoul freezing point theory, based on the solution freezing point declined value proportional to the solution molar concentration, using high sensitivity of temperature-sensing element to measure the freezing point of different solutions, so as to derive the osmotic pressure molar concentration. This theory has been widely used for the test and research of osmotic pressure molar concentration in the fields such as pharmaceuticals,pharmaceutical analysis, biological and food therapy

TAP DENSE TD - 101 is a density measurement equipment used to measure tapped density of powders, as well as granulated or flaked materials by standardized and repeatable procedures. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy a reproducibility. System is equipped with 4-line alphanumeric LCD display with backlit and 16 number of soft touch membrane type keys. The unit is provided with two motorized platforms which allow for 14 ÷ 2.0 mm drop height for the USP Method I version, and a 3 ÷0.3 mm drop height for the USP Method Il version. The motorized platforms consist of two-cylinder holders with snap-lock mechanism designed to hold 100 ml and 250 ml cylinders. The simultaneous rotating and tapping motion minimizes any possible loss of mass during tapping down. The instrument stores the test parameters, readings and results simultaneously in the memory which are retained even after the power is switched OFF. Provision has also been made for attachment of a printer so as to provide hard-copy printouts of test data, including the time, date and calculated results.

SALIENT FEATURES:

• Extremely useful for pharmaceutical labs
• Microprocessor based, easy to use
• 20 x 4 line alphanumeric LCD display with backlit
• 16 Soft touch membrane type keys
• Tap Density, Initial Density, Compressibility Index
• Independent programmable setups for User & USP mode with storage
• RS232 Printer attachment facility
• Automatically calculates result parameters like Hausner Ratio
• Automatically stores last result
• Power failure detection facility
• User-friendly operation with menus & current status indicators

Measuring tablet thickness, diameter and hardness the PHARMAG INSTRUMENTS TabTest-301+Tablet Hardness Tester is both USP and EP compliant and offers excellent flexibility and configurability. This robust 301 design removes the need for a thickness gauge, eliminating redundant calibrations and reducing overall testing cost.

 USP PHARMACOPEIA AND EP COMPLIANTCompliant with USP <1217> and EP <2.9.8>.MULTI-PARAMETER MEASUREMENTSThe TabTest-301+ measures: Thickness, Diameter and Hardness.DISPLAY5 inch High Resolution Touch ScreenSMALL FOOTPRINTIdeal for laboratories with limited bench space, the compact andlightweight design is well suited for portability and use in aproduction setting.SAMPLE THROUGHPUTThroughput is approximately 6-10 samples per minute. SECUREEasy CAL Dot Matrix printer Password Secured"ADJUSTMENT FREE" TESTING JAWSBMRISO 9001 CERTIFIEDCertificate No: AB091S152906AIAO-BAROMS MAKEININDIAACCREDITEDUSARequires no adjustments of the test jaws that are designed tosuit all tablet shapes and sizes with a unique grooved design forproper alignment of each tablet before testing.OVER RANGE ALERT"Alert" will display if the tablet or sample is above the definedhardness range with the option to continue or abort test.